Mud Pump is also a popular concept of a wide range of pumps, different areas, habits, and ultimately the pump type will not be the same, the term described in the mud pump is the most sense of a pump : Oil drilling in the field of application of the mud pump. In fact, the sewage pump, slurry pump and some non-clear water pump and mud pump in the name also has a common time. This entry is intended for readers to read the mud pump in the field of drilling.
Mud pump, refers to the drilling process to the drilling of mud or water and other washing fluid delivery machinery. Mud pumps are an important part of drilling equipment.
In the commonly used circular drilling, it is the surface rinse medium ─ ─ water, mud or polymer rinse liquid under a certain pressure, through the high-pressure hose, faucet and drill rod center hole directly to the bottom of the drill to achieve Cooling the drill bit, cutting the cuttings down and conveying them to the surface.
Commonly used mud pump is piston or plunger type, driven by the power machine crankshaft crankshaft crankshaft through the cross head and then drive the piston or plunger in the pump cylinder to do reciprocating motion. In the inhalation and discharge valve under the alternating effect, to achieve the purpose of pressure and circulation rinse solution.
If the pump by the number of cylinders, a single cylinder, double cylinder, three-cylinder, five-cylinder and other types.
The two main parameters of mud pump performance are displacement and pressure.
The displacement is calculated at several liters per minute, which is related to the diameter of the borehole and the required flushing fluid from the bottom of the hole, ie, the larger the pore size is, the greater the required displacement. Requires the return of the rinse liquid to cut the drill bit down the cuttings, rock powder and timely washed away from the bottom of the hole, and reliably carried to the surface. Geological core drilling, the general return speed of 0.4 to 1.0 m / min or so.
The pressure of the pump depends on the depth of the borehole, the resistance of the passage through which the rinsing solution passes, and the nature of the flushing fluid being conveyed. The deeper the drilling, the greater the resistance of the pipeline, the higher the pressure required.
With the drilling diameter, depth changes, the displacement of the pump can be adjusted at any time. In the pump mechanism is equipped with gearbox or hydraulic motor to adjust its speed, in order to achieve the purpose of changing the displacement. In order to accurately grasp the pump pressure and displacement changes, the mud pump to install the flowmeter and pressure gauge, at any time so that the drilling staff to understand the pump to transport the situation, while the pressure changes through the hole to determine whether the normal condition to prevent the occurrence of holes ACCIDENT.
Mud pump, cylinder head, cylinder head, cylinder head, rod, piston, piston plate, cup, piston seat, piston rod, plunger rod, into the drain valve, into the drain valve seat, cross head, cross head Steel sleeve, connecting rods, connecting rods, connecting rods, connecting rods, connecting rods, connecting rods, connecting rods, connecting rods, connecting rods, connecting rods, connecting rods, Easy to quality problems, in the purchase and use should be noted.